选择下方产品分类进入筛选页面 Showing all 16 results
ImageSKUInput return loss (dB)Insertion Loss (dB)Max.Frequency band (GHz)Min.Frequency band (GHz)Noise Figure (dB)Output P-1Output return loss (dB)Package size (mm)Saturation output powerPriceBuyhf:att:pa_input-return-loss-dbhf:att:pa_insertion-loss-dbhf:att:pa_max-frequency-band-ghzhf:att:pa_min-frequency-band-ghzhf:att:pa_noise-figure-dbhf:att:pa_output-p-1hf:att:pa_output-return-loss-dbhf:att:pa_package-size-mmhf:att:pa_saturation-output-power

Showing all 16 results

Show sidebar
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O228GFN5

The O228GFN5 is a driver amplifier that operates from 6 to 18 GHz. It provides 15dB small signal gain, 18dBm P-1 output power, and 20% power added efficiency at +5V operating voltage. The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O228GSM3

The O228GSM3 is a monolithic mid-power amplifier operating at 6-15GHz. It provides 15dB gain, 18dBm P1dB output power, and 20% power-added efficiency at a single-supply 5V supply voltage. The amplifier uses a 3x3mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O228GSM3B

O228GSM3B is a monolithic medium power amplifier operating at 6-18GHz. It provides 15dB gain, 18dBm P1dB output power, and 20% power-added efficiency at a single-supply 5V supply voltage. The amplifier uses a 3x3mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O553SM4

The O553SM4 is a low noise amplifier operating at 0.8-6.5 GHz. It provides 21dB gain and 17dBm P1dB output power at 65mA operating current.The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O553SM4M

The O553SM4M is a low noise amplifier operating at 1-6GHz. It provides 20dB gain and 17dBm P1dB output power at 60mA operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O553SM84

The O553SM84 is an integrated amplifier operating at 0.8-6.0 GHz. Built-in bias circuit provides 20dB gain and 17dBm P1dB output power at 65mA operating current. The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs to be grounded in a large area. It is suitable for the reflow soldering installation process, and the lead wire must be hand-welded.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O555SM4

The O555SM4 is a driver amplifier that operates from 2 to 5.5 GHz. At a working current of 72mA, it can provide 15dB gain and 17dBm P1dB output power. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM4

The O556SM4 is a driver amplifier that operates from 2 to 6 GHz. It provides 24dB gain and 16dBm P1dB output power at 50A operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM5H

The O556SM5H is a driver amplifier that operates from 2 to 6 GHz. It provides 23dB small signal gain and 15dBm P-1 output power at +5V operating voltage. Noise figure is typically 3dB. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM84

The O556SM84 is an integrated amplifier operating at 2.0-6.0 GHz. Built-in bias circuit provides 24dB gain and 14dBm P1dB output power at 50mA operating current. The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs to be grounded in a large area. It is suitable for the reflow soldering installation process, and the lead wire must be hand-welded.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O566FN5

The O566FN5 is a driver amplifier that operates from 10 to 15 GHz. Provides 28dB of small signal gain and 14.5dBm of P-1 output power at +5V operating voltage. The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O567SM5H

The O567SM5H is a driver amplifier that operates from 10 to 15 GHz. It provides 22dB small signal gain and 12dBm P-1 output power at a +5V operating voltage. The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O568QF4

The O568QF4 is a driver amplifier that operates from 2 to 6 GHz. It can provide 30dB power gain and 30dBm saturated output power under the power supply +28V operating voltage. The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O573FN5

The O573FN5 is a driver amplifier that operates from 5 to 20 GHz. At a +5V operating voltage, it provides 21dB of small signal gain, 21dBm of P-1 output power, and an output third-order intercept point of +30dBm. The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O574FN5

The O574FN5 is a driver amplifier that operates from 4 to 8 GHz. It provides 21dB small signal gain and 15dBm P-1 output power at +5V operating voltage. The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O575QF4

The O575QF4 is a power amplifier that operates from 2 to 6 GHz. It can provide 22dB small signal gain and 25dBm saturated output power under the +28V power supply voltage. The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.