Integrated Low Noise Amplifier O290SM4
The O290SM4 is a low noise amplifier operating from 6 to 13 GHz. 42dB operating current, 21dB gain, 9dBm P1 output power.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Related products
GaN Monolithic Integrated Power Amplifier O1196
The O1196 is a GaN monolithic integrated power amplifier chip operating at 7.0-9.0 GHz. With a pulse width of 100us, a duty cycle of 10%, and a +28V operating voltage, it provides 21dB power gain and 41dBm saturated output power.
Power-added efficiency 44%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O220
The O220 is a GaAs monolithic integrated power amplifier chip operating at 15.0-17.5 Ghz delivering 20dB of power gain and 36dBm of saturated output power with 100us pulse width, 10% duty cycle, and +8 V operation. The power added efficiency 25%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O224
The O224 is a GaAs monolithic integrated power amplifier operating at 12.8 to 14.6GHz and delivers 23dB of power gain and 32dBm of saturated output power at a + 5V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O571
The O571 is a GaN monolithic integrated driver amplifier operating at 8.0-12.0GHz delivering 16dB of power gain and 26dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O214
The O214 is a GaAs monolithic integrated power amplifier IC operating from 11 to 17 GHz delivering 19dB of power gain and 28dBm of saturated output power at + 8V operating voltage.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Driver Amplifier O568
The O568 is a GaN monolithically integrated driver amplifier chip operating at 2.0-6.0GHz delivering 25dB of power gain and 30dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O570
The O570 is a GaN monolithic integrated driver amplifier chip operating at 8.0-12.0GHz delivering 16dB of power gain and 24dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O1198
The O1198 is a GaN monolithic integrated power amplifier chip operating at 5.0-6.0GHz. It provides 20.5dB power gain and 40.5dBm saturated output power at continuous wave and +28V operating voltage, and the
power-added efficiency is 47%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.