Showing all 9 results

Show sidebar
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O553SM4M

The O553SM4M is a low noise amplifier operating at 1-6GHz. It provides 20dB gain and 17dBm P1dB output power at 60mA operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O555SM4

The O555SM4 is a driver amplifier that operates from 2 to 5.5 GHz. At a working current of 72mA, it can provide 15dB gain and 17dBm P1dB output power. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM4

The O556SM4 is a driver amplifier that operates from 2 to 6 GHz. It provides 24dB gain and 16dBm P1dB output power at 50A operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O575QF4

The O575QF4 is a power amplifier that operates from 2 to 6 GHz. It can provide 22dB small signal gain and 25dBm saturated output power under the +28V power supply voltage. The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O283SM5

The O282SM5H is a low noise amplifier operating from 5 to 6 GHz. At a +5V operating voltage, it provides 24dB of small signal gain, 11dBm of P-1 output power, and a typical noise figure of 1.0dB. The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O291SM5

The O291SM5 is a GaAs integrated low noise amplifier operating from 8 to 12 GHz. At +5V operating voltage, it provides 19dB small signal gain, 1.7dB noise figure, and output third-order intercept point above +20dBm. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O301SM5

The O301SM5 is a GaAs integrated low noise amplifier operating from 2 to 20 GHz. At +5V operating voltage, 16dB small signal gain, 2.5dB noise figure, and output third-order intercept point above +19dBm are available. The amplifier uses a 5x5mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O301SM7H

The O301SM7H is an integrated low noise amplifier that operates from 2 to 20 GHz. Provides 15dB of small signal gain, 2.0dB noise figure, and higher than +22V at +5V operating voltage dBm output third-order intercept point. The amplifier adopts 7x7mm surface-mount non-leaded ceramic package, which can realize gas-tight encapsulation. The surface of the pin pad is processed by gold plating and is suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O303SM5

The O303SM5 is a GaAs integrated low noise amplifier that operates from DC to 20GHz. At +5V operating voltage, 16dB small signal gain, 2.5dB noise figure, and output third-order intercept point above +24dBm are available. The amplifier uses a 5x5mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.