喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Ferrite Devices OIS-340360-05-18-28
Model OIS-340360-05-18-28 is a Ka band waveguide junction isolator that covers the frequency range of 33.6 to 36.4GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of 0.5 dB typical and a much shorter insertion length for system integration. As a trade off, the waveguide junction isolator only offers a typical isolation of 18 dB.
The input and output ports are WR-28 waveguides withUG-599/U flanges.
Ferrite Devices OIS-370400-05-18-28
Model OIS-370400-05-18-28 is a Ka band waveguide junction isolatorthat covers the frequency range of 37 to 40GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of 0.5dB typical and a much shorter insertion length for system integration. As a trade off, the waveguide junction isolator only offers a typical isolation of 18dB.
The input and output ports are WR-28 waveguides with UG-599/Uflanges.
Ferrite Devices OIS-460480-05-18-22
Model OIS-460480-05-18-22 is a Q band waveguide junction isolator that covers the frequency range of 46 to 48GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of0.5 dB nominal and a much shorter insertion length for systemintegration. As a tradeoff, the waveguide junction isolator only offers anisolation of 18 dB typical. The input and output ports are WR-22waveguides with UG-383/U flanges. Various configurations andfrequency ranges are offered under different model numbers.
GaAs Monolithic Integrated Switch O142
O142 is a reflective gallium arsenide (PIN) single-pole, single-throw single-throw single-throw MMIC switch chip with an operating frequency of 4 to 26 GHz. The switch chip provides greater than 45dB isolation and less than 0.8dB insertion loss over the entire operating frequency range. Built-in bias network, easy to use. With excellent switching characteristics and port standing wave characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems.
The switch chip adopts on-chip through-hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.
GaAs Monolithic Integrated Switch O143
O143 is a reflective gallium arsenide PIN single-pole single-throw single-throw MMIC switch chip with an operating frequency of 0.1 to 30 GHz. The switch chip provides greater than 45dB isolation and less than 0.8dB insertion loss over the entire operating frequency range. With excellent switching characteristics and port standing wave
characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems.
The switch chip adopts on-chip through-hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.
Integrated Switch O117SM3
The O117SM3 is a GaAs reflective single pole, double throw switch with an operating frequency of DC~6GHz. The switch provides greater than 30dB isolation and less than 0.8dB insertion loss over the entire operating frequency range. It uses 0/+5V logic control and requires no external power supply bias and no power consumption.
With excellent switching characteristics and port standing wave characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems. The switch uses a 3x3mm surface-mount non-leaded ceramic package to achieve hermetic encapsulation. The surface of the pin pad is gold-plated and suitable for reflow soldering.
Integrated Switch O117SM3B
The O117SM3B is a GaAs reflective single-pole, double-throw switch with an operating frequency of DC~6GHz. The switch provides greater than 30dB isolation and less than 0.8dB insertion loss over the entire operating frequency range. It uses 0/+5V logic control and requires no external power supply bias and no power consumption.
With excellent switching characteristics and port standing wave characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems. The switch uses a 3x3mm surface-mount non-leaded ceramic package to achieve hermetic encapsulation. The surface of the pin pad is gold-plated and suitable for reflow soldering.
RF Filter Highpass OWBP-7000-12
Model OWBP-7000-12 is an E band waveguide highpass filter with a passband frequency of 70 GHz and higher and a rejection frequency from DC to 66 GHz.
The filter provides a nominal insertion loss of 0.5 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.