喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Ferrite Devices OIS-180270-15-15-KFKF-I
Model OIS-180270-15-15-KFKF-I is a full K band coaxial isolator that covers the frequency range of 18 to 26.5GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of1.5dB typical with good flatness. Theisolator also offers a moderate isolation of 15dBfor system integration and a highpower handling.
The RF interface of other type of connector combinations are alsooffered under different model numbers.
Ferrite Devices OIS-180270-15-15-SFSF-I
Model OIS-180270-15-15-SFSF-I is a full K band coaxial isolator that covers the frequency range of 18 to 26.5GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of 1.5dB typical with good flatness. The isolator also offers a moderate isolation of 15dBfor system integration and a highpower handling.
The input and output ports are SMA(F) connectors. The RFinterface of other type of connectors, such as SMA(M) or 2.92 mm (K) connectors isalso available under different model numbers.
GaAs Monolithic Integrated Switch O114
O114 is a reflective gallium arsenide pHEMT single-pole double-throw switch chip, operating frequency covering DC ~ 30GHz. The switch chip can provide less than 2.2dB insertion loss and greater than 26dB isolation across the operating frequency band. Use 0/-5V logic control, no external power supply bias, no power consumption. It is often suitable for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.
Integrated Switch O110SM3B
The O110SM3B is a GaAs Absorption Single-pole Single-throw Switch that provides greater than 40dB isolation and less than 2.5dB insertion loss over the entire operating frequency range, using 0/-5V logic control.
With excellent switching characteristics and port standing wave characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems. The switch uses a 3x3mm surface-mount non-leaded ceramic package for hermetic encapsulation, and the pin pad surface is gold-plated for reflow soldering.
RF Filter Bandpass OWBP-30005000-22
Model OWBP-30005000-22 is a Q band waveguide bandpass filter with a passband frequency of 30 to 50 GHz and rejection frequencies from DC to 25 GHz and 56 to 100 GHz.
The nominal insertion loss of the bandpass filter is 1.5 dB and the typical rejection is 40 dB. Since both low end and high end cut off frequencies can be selected by modifying the design, custom designs are available under different model numbers.
RF Filter Bandpass OWBP-33003700-28
Model OWBP-33003700-28 is a Ka band waveguide bandpass filter with a passband frequency of 33.0 to 37.0 GHz and rejection frequencies from DC to 31 GHz and 39 to 46 GHz.
The nominal insertion loss of the bandpass filter is 1.5 dB and the typical rejection is 40 dB. Since both low end and high end cut off frequencies can be selected by modifying the design, custom designs are available under different model numbers.
RF Filter Bandpass OWBP-34006700-19
Model OWBP-34006700-19 is an U band waveguide bandpass filter with a passband frequency of 34 to 67 GHz and rejection frequencies from DC to 30 GHz and 69 to 120 GHz.
The nominal insertion loss of the bandpass filter is 1.5 dB and the typical rejection is 40 dB. Since passband frequency can be selected by modifying the design, custom designs are available under different model numbers.
RF Filter Bandpass OWBP-36006000-19
Model OWBP-36006000-19 is an U band waveguide bandpass filter with a passband frequency of 36 to 60 GHz and rejection frequencies from DC to 29 GHz and 66 to 120 GHz.
The nominal insertion loss of the bandpass filter is 1.5 dB and the typical rejection is 40 dB. Since passband frequency can be selected by modifying the design, custom designs are available under different model numbers.
RF Filter Lowpass OWBP-50007500-15
Model OWBP-50007500-15 is a V band waveguide lowpass filter with a passband frequency from 50 to 75 GHz and a rejection frequency from 79 to 120 GHz.
The filter provides a nominal insertion loss of 1.5 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the high end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Lowpass OWBP-50007500-15
Model OWBP-50007500-15 is a V band waveguide lowpass filter with a passband frequency from 50 to 75 GHz and a rejection frequency from 79 to 120 GHz.
The filter provides a nominal insertion loss of 1.5 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the high end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.