Showing all 9 results

Show sidebar
Ferrite Devices OIS-270400-16-14-KFKF-C
Close

Ferrite Devices OIS-270400-16-14-KFKF-C

Model OIS-270400-16-14-KFKF-C is a Ka band coaxial circulator that,covers the frequency range of 26.5 to 40GHz. The coaxial circulator is designed and manufactured to provide a low insertion loss of 1.6dB typical with goodflatness. The circulator also offers a moderate isolation of 14dBfor systemintegration.The input and output ports are 2.92 mm(K)female connectors. The RF interface of other type of connectors,such as 2.92 mm (M) connectors is also available under different model numbers.
Ferrite Devices OIS-270400-16-14-KFKF-I
Close

Ferrite Devices OIS-270400-16-14-KFKF-I

Model OIS-270400-16-14-KFKF-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz. The full band isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. The isolator also offers a moderate isolation of 14dB and a high-power handling forsystem integration.The input and output ports are K (F) connectors. The RF interface of other type of connector combinations are also offered under differentmodel numbers.
Ferrite Devices OIS-270400-16-14-KFKM-I
Close

Ferrite Devices OIS-270400-16-14-KFKM-I

Model OIS-270400-16-14-KFKM-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz. The fullband isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. Theisolator also offers a moderate isolation of 14dB and a high-power handling forsystem integration. The input port is K (F) connector and output ports is K (M)connector.The RF interface of other type of connector combinations are also offered under different model numbers.
Ferrite Devices OIS-270400-16-14-KMKF-I
Close

Ferrite Devices OIS-270400-16-14-KMKF-I

Model OIS-270400-16-14-KMKF-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz. The full band isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. The isolator also offers a moderate isolation of 14dB and a high-power handling for system integration.The input port is K (M)
Ferrite Devices OIS-270400-16-14-KMKM-I
Close

Ferrite Devices OIS-270400-16-14-KMKM-I

Model OIS-270400-16-14-KMKM-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz. The full band isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. The isolator also offers a moderate isolation of 14dB and a high-power handling for system integration.The input and output ports are K (M) connectors. The RFinterface of other type of connector combinations are also offered underdifferent model numbers.
Integrated Switch O121SM4
Close

Integrated Switch O110DSM4M

The O110DSM4M is an absorption single-pole-single-throw switch with an operating frequency of DC ~ 12GHz. The switch provides greater than 37dB isolation and less than 2.1dB insertion loss over the entire operating frequency range. Built-in driver circuit, using 0/+5V logic control. With excellent switching characteristics and port standing wave characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems. The switch uses a 4x4mm surface-mount non-leaded ceramic package to achieve hermetic encapsulation. The surface of the pin pad is gold-plated and suitable for reflow soldering processes.
Integrated Switch O121SM4
Close

Integrated Switch O110SM3BM

The O110SM3BM is an absorptive SPST switch operating at DC to 15GHz. The switch provides greater than 28dB isolation and less than 2.5dB insertion loss over the entire operating frequency range, using 0/-5V logic control. With excellent switching characteristics and port standing wave characteristics over the entire operating frequency range, it is ideally suited for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems. The switch uses a 3x3 mm surface mount leadless ceramic package to achieve hermetic encapsulation. The surface of the pin pad is gold plated and suitable for reflow soldering.