Showing all 8 results

Show sidebar
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O553SM4M

The O553SM4M is a low noise amplifier operating at 1-6GHz. It provides 20dB gain and 17dBm P1dB output power at 60mA operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O553SM84

The O553SM84 is an integrated amplifier operating at 0.8-6.0 GHz. Built-in bias circuit provides 20dB gain and 17dBm P1dB output power at 65mA operating current. The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs to be grounded in a large area. It is suitable for the reflow soldering installation process, and the lead wire must be hand-welded.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM4

The O556SM4 is a driver amplifier that operates from 2 to 6 GHz. It provides 24dB gain and 16dBm P1dB output power at 50A operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM5H

The O556SM5H is a driver amplifier that operates from 2 to 6 GHz. It provides 23dB small signal gain and 15dBm P-1 output power at +5V operating voltage. Noise figure is typically 3dB. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O556SM84

The O556SM84 is an integrated amplifier operating at 2.0-6.0 GHz. Built-in bias circuit provides 24dB gain and 14dBm P1dB output power at 50mA operating current. The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs to be grounded in a large area. It is suitable for the reflow soldering installation process, and the lead wire must be hand-welded.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O568QF4

The O568QF4 is a driver amplifier that operates from 2 to 6 GHz. It can provide 30dB power gain and 30dBm saturated output power under the power supply +28V operating voltage. The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O575QF4

The O575QF4 is a power amplifier that operates from 2 to 6 GHz. It can provide 22dB small signal gain and 25dBm saturated output power under the +28V power supply voltage. The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.
Integrated Power Amplifier O259SM7H
Close

Integrated Power Amplifier O1198SM7H

The O1198SM7H is a GaN integrated power amplifier operating from 5 to 6 GHz. It provides 21dB power gain, 41dBm saturated output power, and 45% power efficiency at a +28V operating voltage. The amplifier adopts 7mmx7mm surface-mount non-leaded ceramic package, which can realize gas-tight encapsulation. The surface of the pin pad is processed by gold plating and is suitable for reflow soldering installation process.