喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Driver Amplifier O555SM4
The O555SM4 is a driver amplifier that operates from 2 to 5.5 GHz. At a working current of 72mA, it can provide 15dB gain and 17dBm P1dB output power.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O556SM4
The O556SM4 is a driver amplifier that operates from 2 to 6 GHz. It provides 24dB gain and 16dBm P1dB output power at 50A operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O556SM5H
The O556SM5H is a driver amplifier that operates from 2 to 6 GHz. It provides 23dB small signal gain and 15dBm P-1 output power at +5V operating voltage. Noise figure is typically 3dB.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation and is suitable for reflow solder mounting processes.
Integrated Driver Amplifier O556SM84
The O556SM84 is an integrated amplifier operating at 2.0-6.0 GHz. Built-in bias circuit provides 24dB gain and 14dBm P1dB output power at 50mA operating current.
The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs to be grounded in a large area. It is suitable for the reflow soldering installation process, and the lead wire must be hand-welded.
Integrated Driver Amplifier O568QF4
The O568QF4 is a driver amplifier that operates from 2 to 6 GHz. It can provide 30dB power gain and 30dBm saturated output power under the power supply +28V operating voltage.
The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.
Integrated Driver Amplifier O575QF4
The O575QF4 is a power amplifier that operates from 2 to 6 GHz. It can provide 22dB small signal gain and 25dBm saturated output power under the +28V power supply voltage.
The amplifiers are packaged in a metal package and can be hermetically sealed. The surface of the pin pad is gold-plated and suitable for reflow soldering.