喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O279SM4
The O279SM4 is a low noise amplifier operating at 2-6GHz. Built-in bias circuit provides 24dB gain, 12dBm P1dB output power, and 1.5dB in-band noise figure at 45mA.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O283SM5
The O282SM5H is a low noise amplifier operating from 5 to 6 GHz. At a +5V operating voltage, it provides 24dB of small signal gain, 11dBm of P-1 output power, and a typical noise figure of 1.0dB.
The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O286SM4
The O286SM4 is a low noise monolithic amplifier operating at 6-13 GHz. The built-in bias circuit can provide 20dB gain, 10dBm P1dB output power and an in-band noise figure of 1.5dB at room temperature under 42mA operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O287SM4
The O287SM4 is a low noise amplifier operating at 8-12 GHz. It provides 22dB gain and 13dBm P1dB output power at 55mA operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O289SM5H
The O289SM5H is a low noise amplifier operating from 14 to 18 GHz. At a +5V operating voltage, it provides 26dB of small signal gain, 10dBm of P-1 output power, and a typical noise figure of 1.5dB.
The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Low Noise Amplifier O290SM4
The O290SM4 is a low noise amplifier operating from 6 to 13 GHz. 42dB operating current, 21dB gain, 9dBm P1 output power.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O290SM5H
The O290SM5H is a low noise amplifier operating from 6 to 13 GHz. At a +5V operating voltage, it provides 21dB of small signal gain, 10dBm of P-1 output power, and a typical noise figure of 1.5dB.
The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.