喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5GAn isolator is a device used for isolating a circuit from a basis of power. An isolator is a motorized swapping device that, in the open site, allows for isolation of the input and output of a device.
RF isolators are 2-port passive devices that help defend radiofrequency mechanisms extreme current or signal reflection. usually used in radar systems wireless communications, distributed antenna systems, test labs, and amplifier systems.
RF isolators cover the frequency range from 8GHz to 76GHz, where the insertion loss from 0.20dB to 1.60dB.Isolation in isolators is from 14dB to 30dB, and VSWR are 1.15:1, 1.25:1, 1.35:1, 1.3:1, 1.4:1, 1.5:1 and 1.6:1.
Ferrite Devices OIS-180270-15-15-KFKF-I
Model OIS-180270-15-15-KFKF-I is a full K band coaxial isolator that covers the frequency range of 18 to 26.5GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of1.5dB typical with good flatness. Theisolator also offers a moderate isolation of 15dBfor system integration and a highpower handling.
The RF interface of other type of connector combinations are alsooffered under different model numbers.
Ferrite Devices OIS-180270-15-15-SFSF-I
Model OIS-180270-15-15-SFSF-I is a full K band coaxial isolator that covers the frequency range of 18 to 26.5GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of 1.5dB typical with good flatness. The isolator also offers a moderate isolation of 15dBfor system integration and a highpower handling.
The input and output ports are SMA(F) connectors. The RFinterface of other type of connectors, such as SMA(M) or 2.92 mm (K) connectors isalso available under different model numbers.
Ferrite Devices OIS-270400-16-14-KFKF-C
Model OIS-270400-16-14-KFKF-C is a Ka band coaxial circulator that,covers the frequency range of 26.5 to 40GHz.
The coaxial circulator is designed and manufactured to provide a low insertion loss of 1.6dB typical with goodflatness. The circulator also offers a moderate isolation of 14dBfor systemintegration.The input and output ports are 2.92 mm(K)female connectors.
The RF interface of other type of connectors,such as 2.92 mm (M) connectors is also available under different model numbers.
Ferrite Devices OIS-270400-16-14-KFKF-I
Model OIS-270400-16-14-KFKF-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. The isolator also offers a moderate isolation of 14dB and a high-power handling forsystem integration.The input and output ports are K (F) connectors.
The RF interface of other type of connector combinations are also offered under differentmodel numbers.
Ferrite Devices OIS-270400-16-14-KFKM-I
Model OIS-270400-16-14-KFKM-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz.
The fullband isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. Theisolator also offers a moderate isolation of 14dB and a high-power handling forsystem integration.
The input port is K (F) connector and output ports is K (M)connector.The RF interface of other type of connector combinations are also offered under
different model numbers.
Ferrite Devices OIS-270400-16-14-KMKF-I
Model OIS-270400-16-14-KMKF-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. The isolator also offers a moderate isolation of 14dB and a high-power handling for system integration.The input port is K (M)
Ferrite Devices OIS-270400-16-14-KMKM-I
Model OIS-270400-16-14-KMKM-I is a full Ka band coaxial isolator that covers the frequency range of 26.5 to 40GHz.
The full band isolator is designed andmanufactured to provide an insertion loss of 1.6dB typical with good flatness. The isolator also offers a moderate isolation of 14dB and a high-power handling for system integration.The input and output ports are K (M) connectors.
The RFinterface of other type of connector combinations are also offered underdifferent model numbers.
Ferrite Devices OIS-290310-03-20-28
Model OIS-290310-03-20-28 is a Ka band waveguide junction isolatorthat covers the frequency range of 29 to31 GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of 0.3dB typical and a much shorter insertion length for system integration. As atrade off, the waveguide junction isolator only offers a typical isolation of20dB.
The input and output ports are WR-28 waveguides with UG-599/U flanges.
Ferrite Devices OIS-34-H
Model OIS-34-H is a WR-34,waveguide junction isolator that covers thefrequency range of 22 to 33GHz.
The full band isolator is designed andmanufactured to provide a low insertion loss of 0.45dB typical with goodflatness. The isolator also offers a moderate isolation of 19dB for systemintegration and a high power handling.
The input and output ports are WR-34waveguides with UG-1530/U flanges.
Ferrite Devices OIS-340360-03-20-28
Model OIS-340360-03-20-28 is a Ka band waveguide junction isolatorthat covers the frequency range of 34 to 36GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of 0.3dB typical and a much shorter insertion length for system integration. As a trade off, the waveguide junction isolator only offers a typical isolation of 20dB.
The input and output ports are WR-28 waveguides with UG-599/Uflanges.
Ferrite Devices OIS-340360-05-18-28
Model OIS-340360-05-18-28 is a Ka band waveguide junction isolator that covers the frequency range of 33.6 to 36.4GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of 0.5 dB typical and a much shorter insertion length for system integration. As a trade off, the waveguide junction isolator only offers a typical isolation of 18 dB.
The input and output ports are WR-28 waveguides withUG-599/U flanges.
Ferrite Devices OIS-370400-05-18-28
Model OIS-370400-05-18-28 is a Ka band waveguide junction isolatorthat covers the frequency range of 37 to 40GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of 0.5dB typical and a much shorter insertion length for system integration. As a trade off, the waveguide junction isolator only offers a typical isolation of 18dB.
The input and output ports are WR-28 waveguides with UG-599/Uflanges.
Ferrite Devices OIS-400440-07-18-2224F-S
Model OIS-400440-07-18-2224F-S is a Q band Iso-adapter that covers the
frequencyrange of40to44GHz.The iso-adapter offers nominal 0.7 dB insertion loss
and an18dB typical isolation.The iso-adapter is designed and fabricated to
bridge thewaveguide to coax interface directly, yet exhibits the port isolation
to improvethe system performance.
The input port of the model isWR-22waveguide withstandardUG-383/U
flange and 2.4 mm (F) connector as output port.Themodel number with the
reversed input and output ports is SNA-4034430718-2F22-S1
Ferrite Devices OIS-42
Model OIS-42 is a K band,wave guide junction isolator that covers thefrequency range of 18 to 26.5 GHz.
The full band isolator is designed andmanufactured to provide a low insertion loss of 0.3dB typical with good flatness.Compared to a Faraday isolator,it offers a much shorter insertion lengthfor systemintegration.
The isolator also offers a moderate isolation of 20dB. Theinput and output ports are WR-42waveguides with UG-595/U flanges.
Ferrite Devices OIS-460480-05-18-22
Model OIS-460480-05-18-22 is a Q band waveguide junction isolator that covers the frequency range of 46 to 48GHz.
Compared with a Faradayisolator, the waveguide junction isolator offers a lower insertion loss of0.5 dB nominal and a much shorter insertion length for systemintegration. As a tradeoff, the waveguide junction isolator only offers anisolation of 18 dB typical. The input and output ports are WR-22waveguides with UG-383/U flanges. Various configurations andfrequency ranges are offered under different model numbers.
Ferrite Devices OIS-540560-10-16-15
Model OIS-540560-10-16-15 is a V band waveguide junction isolator that covers the frequency range of 54 to 56GHz.
Compared with a Faraday isolator, the waveguidejunction isolator offers a lower insertion loss of 1.0 dBnominal and a much shorter insertion length for systemintegration. As a tradeoff, the waveguide junction isolatoronly offers a typical isolation of 16 dB. The input and outputports are WR-15 waveguides with UG-385/U flanges.