Showing all 4 results

Show sidebar
Integrated Mixer O393SM4
Close

Integrated Mixer O350LSM84

O350LSM84 is a double-balanced mixer with integrated local oscillator driving amplifier. The power supply voltage is +5V, DC power consumption is 70mA@5V, and the local oscillator amplifier is built in. The local oscillator/RF frequency range covers 1.5~4.5GHz, and the IF frequency covers DC. ~2.5GHz, the in-band conversion loss is less than 10dB, and the temperature performance is stable. Mixer uses 5x7mm surface-mount cermet shell, fully sealed, the bottom surface needs a large area of ground, suitable for reflow installation process, the lead needs to be hand-welded.
Integrated Mixer O393SM4
Close

Integrated Mixer O351SM4

The O351SM4 is a passive double-balanced mixer that does not require external DC bias. The local/RF frequency range covers 2.0 to 6.0 GHz, the IF frequency covers DC to 3.0 GHz, and the in-band conversion loss is less than 9 dB. The temperature performance is stable.Mixer uses 4x4mm surface-mount cermet shell, fully sealed, the bottom surface needs a large area of ground, suitable for reflow installation process, the lead needs manual welding.
Integrated Mixer O393SM4
Close

Integrated Mixer O361SM4M

O361SM4M is a GaAs passive double-balanced mixer, which does not require external DC bias. The local/RF frequency range covers 0.6~2.4GHz, the IF frequency covers DC ~ 1.3GHz, the in-band conversion loss is less than 10dB, and the temperature performance is stable. The mixer uses a 4x4mm surface-mount non-leaded ceramic package to achieve hermetic encapsulation. The surface of the pin pad is gold-plated and suitable for reflow soldering processes.
Integrated Mixer O393SM4
Close

Integrated Mixer O380SM84

The O380SM84 is an integrated high-IP3 mixer that does not require external DC bias. The LO/RF frequency range covers 0.7 to 2.2 GHz, the IF frequency covers DC to 0.8 GHz, and the in-band conversion loss is less than 10 dB. The temperature performance is stable.Mixer uses 5x7mm surface-mount cermet shell, fully sealed, the bottom surface needs a large area of ground, suitable for reflow installation process, the lead needs to be hand-welded.