Integrated Low Noise Amplifier O278SM5H
The O278SM5H is a low noise amplifier operating from 4 to 8 GHz. At a +5V operating voltage, 22dB of small signal gain, 9dBm of P-1 output power, and a typical noise figure of 1.2dB are available.
The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Related products
GaAs Monolithic Integrated Power Amplifier O210
The O210 is a GaAs monolithic integrated power amplifier chip operating at 6.8-9.0 GHz delivering 23dB of power gain and 33dBm of saturated output power with 100us pulse width, 10% duty cycle and + 6V operation. The power added efficiency 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Power Amplifier O248
The O248 is a GaN monolithic integrated power amplifier chip operating at 19-21GHz. It provides 15dB power gain and 40dBm saturated output power at a pulse width of 100us, a duty cycle of 10%, and a +28V operating voltage. The power added efficiency is 29. %.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O241
The O241 is a 1.2-1.4GHz GaAs monolithic integrated power amplifier chip, which provides 21dB power gain and 26dBm saturated output power at + 5V operating voltage with power added efficiency of 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip is metallized for eutectic sintering.
GaAs Monolithic Integrated Power Amplifier O214
The O214 is a GaAs monolithic integrated power amplifier IC operating from 11 to 17 GHz delivering 19dB of power gain and 28dBm of saturated output power at + 8V operating voltage.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O251
The O251 is a GaN monolithic integrated power amplifier chip operating at 5.0-6.5GHz. It provides 22dB power gain and 36dBm saturated output power at a continuous wave, +28V operating voltage, and a power-added efficiency of 48%.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O239
The O239 is a gallium arsenide PHEMT power amplifier chip operating at 1.0 ~ 1.4GHz, providing 25dB power gain and 28dBm saturated output power at + 5V working voltage
48% power added efficiency.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O252
The O252 is a GaN monolithic integrated power amplifier chip working on 4.4-6.0GHz. It provides 22dB power gain and 43dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 48%.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O222G
The O222G is a GaAs monolithic integrated power amplifier chip operating at 8.0-12.0GHz delivering 21dB of power gain and 29dBm of saturated output power at + 8V operating power with an additional power efficiency of 30%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.