喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O279SM4
The O279SM4 is a low noise amplifier operating at 2-6GHz. Built-in bias circuit provides 24dB gain, 12dBm P1dB output power, and 1.5dB in-band noise figure at 45mA.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Related products
GaAs Monolithic Integrated Power Amplifier O239
The O239 is a gallium arsenide PHEMT power amplifier chip operating at 1.0 ~ 1.4GHz, providing 25dB power gain and 28dBm saturated output power at + 5V working voltage
48% power added efficiency.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O214
The O214 is a GaAs monolithic integrated power amplifier IC operating from 11 to 17 GHz delivering 19dB of power gain and 28dBm of saturated output power at + 8V operating voltage.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O243
The O243 is a 1.2 ~ 1.4GHz GaAs monolithic integrated power amplifier chip that provides 22dB power gain and 26dBm saturated output power at +5 V operating voltage with 36% power added efficiency.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O222
The O222 is a GaAs monolithic integrated power amplifier chip operating at 8.0-12.0GHz delivering 21dB of power gain and 29dBm of saturated output power at + 8V operating power with an additional power efficiency of 30%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Power Amplifier O1198
The O1198 is a GaN monolithic integrated power amplifier chip operating at 5.0-6.0GHz. It provides 20.5dB power gain and 40.5dBm saturated output power at continuous wave and +28V operating voltage, and the
power-added efficiency is 47%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaN Monolithic Integrated Power Amplifier O1193
The O1193 is a 2.7-3.5GHz GaN monolithic integrated power amplifier chip. It provides 24dB power gain and 40dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 40%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaN Monolithic Integrated Driver Amplifier O568
The O568 is a GaN monolithically integrated driver amplifier chip operating at 2.0-6.0GHz delivering 25dB of power gain and 30dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O570
The O570 is a GaN monolithic integrated driver amplifier chip operating at 8.0-12.0GHz delivering 16dB of power gain and 24dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.