Showing 1–16 of 22 results

Show sidebar
Ferrite Devices OIS-540560-10-16-15
Close

Ferrite Devices OIS-540560-10-16-15

Model OIS-540560-10-16-15 is a V band waveguide junction isolator that covers the frequency range of 54 to 56GHz. Compared with a Faraday isolator, the waveguidejunction isolator offers a lower insertion loss of 1.0 dBnominal and a much shorter insertion length for systemintegration. As a tradeoff, the waveguide junction isolatoronly offers a typical isolation of 16 dB. The input and outputports are WR-15 waveguides with UG-385/U flanges.
Ferrite Devices OIS-590610-10-16-15
Close

Ferrite Devices OIS-590610-10-16-15

Model OIS-590610-10-16-15 is a V band waveguide junction isolator that covers the frequency range of 59 to 61GHz. Compared with a Faraday isolator, the waveguidejunction isolator offers a lower insertion loss of 1.0 dBnominal and a much shorter insertion length for systemintegration. As a tradeoff, the waveguide junction isolatoronly offers a typical isolation of 16 dB. The input and outputports are WR-15 waveguides with UG-385/U flanges.
GaAs Monolithic Integrated Switch O147
Close

GaAs Monolithic Integrated Switch O116

O116 is an absorption type gallium arsenide pHEMT single pole double throw switch chip, working frequency covers 100M~4GHz. The switch chip can provide less than 1.2dB insertion loss and greater than 38dB isolation across the operating frequency band. Using 0/+5V logic control, no external power supply bias, no power consumption. It is often suitable for microwave hybrid integrated circuits and multi-chip modules as well as low-power systems. The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.
RF Filter Bandpass OWBP-92009600-10
Close

RF Filter Bandpass OWBP-92009600-10

Model OWBP-92009600-10 is a W band waveguide bandpass filter with a passband frequency of 92 to 96 GHz and rejection frequencies from DC to 90 GHz and 98 to 130 GHz. The nominal insertion loss of the bandpass filter is 2.5 dB and the typical rejection is 40 dB. Since both low end and high end cut off frequencies can be selected by modifying the design, custom designs are available under different model numbers.
RF Filter Highpass OWBP-5000-15
Close

RF Filter Highpass OWBP-5000-15

Model OWBP-5000-15 is a V band waveguide highpass filter with a passband frequency of 50 GHz and higher and a rejection frequency from DC to 46 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-6000-12
Close

RF Filter Highpass OWBP-6000-12

Model OWBP-6000-12 is an E band waveguide highpass filter with a passband frequency of 60 GHz and higher and a rejection frequency from DC to 55 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-6300-15
Close

RF Filter Highpass OWBP-6300-15

Model OWBP-6300-15 is a V band waveguide highpass filter with a passband frequency of 63 GHz and higher and a rejection frequency from DC to 57 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-6700-12
Close

RF Filter Highpass OWBP-6700-12

Model OWBP-6700-12 is an E band waveguide highpass filter with a passband frequency of 67 GHz and higher and a rejection frequency from DC to 65 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-7500-10
Close

RF Filter Highpass OWBP-7500-10

Model OWBP-7500-10 is a W band waveguide highpass filter with a passband frequency of 75 GHz and higher and a rejection frequency from DC to 70 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-7500-15
Close

RF Filter Highpass OWBP-7500-15

Model OWBP-7500-15 is a V band waveguide highpass filter with a passband frequency of 75 GHz and higher and a rejection frequency from DC to 71 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-8100-12
Close

RF Filter Highpass OWBP-8100-12

Model OWBP-8100-12 is an E band waveguide highpass filter with a passband frequency of 81 GHz and higher and a rejection frequency from DC to 77 GHz. The filter provides a nominal insertion loss of 1.0 dB across its passband with a low ripple and a typical rejection of 40 dB. Since the low end cutoff frequency can be changed by modifying the design, custom designs can be offered under different model numbers.
RF Filter Highpass OWBP-8200-10
Close

RF Filter Highpass OWBP-8200-10

Model OWBP-8200-10 is a W band waveguide highpass filter with a passband frequency of 82 GHz and higher and a rejection frequency from DC to 80 GHz. The filter provides a nominal insertion loss of 1.0 dB in its passband and a typical rejection of 40 dB at 80 GHz and below. Because the passband frequency can be set by modifying the design, other highpass filters with various passband are offered under different model numbers.
RF Filter Highpass OWBP-8600-10
Close

RF Filter Highpass OWBP-8600-10

Model OWBP-8600-10 is a W band waveguide highpass filter with a passband frequency of 86 GHz and higher and a rejection frequency from DC to 82 GHz. The filter provides a nominal insertion loss of 1.0 dB in its passband and a typical rejection of 40 dB at 82 GHz and below. Because the passband frequency can be set by modifying the design, other highpass filters with various passband are offered under different model numbers.