喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
GaAs Monolithic Integrated Power Amplifier O234
The O234 is a gallium arsenide PHEMT monolithic integrated power amplifier chip operating at
2.7-3.5GHz. It offers 24dB power gain and 41dBm saturated output power with a pulse width of 100us, duty cycle of 10% and operating voltage of + 8.5V , Power added efficiency 33%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Power Amplifier O1193
The O1193 is a 2.7-3.5GHz GaN monolithic integrated power amplifier chip. It provides 24dB power gain and 40dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 40%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaN Monolithic Integrated Power Amplifier O258
The O258 is a 2.7-3.5GHz GaN monolithic integrated power amplifier chip. It provides 22dB power gain and 43dBm saturated output power at a pulse width of 100us, a duty cycle of 10%, and a +28V operating voltage. Power-added efficiency 45%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaN Monolithic Integrated Power Amplifier O259
The O259 is a 2.7-3.5GHz GaN monolithic integrated power amplifier chip. With a pulse width of 100us, a duty cycle of 10%, and a +28V operating voltage, it provides 21dB of power gain and 41dBm of saturated output power. Power-added efficiency 48%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.