Showing all 5 results

Show sidebar
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O265FN5

The O265FN5 is a low noise amplifier operating from 0.8 to 5 GHz. At a +5V operating voltage, it provides 14dB of small signal gain, 19dBm of P-1 output power, and a typical noise figure of 2.5dB. The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O265SM4

The O265SM4 is a low noise amplifier operating from 0.8 to 5 GHz. 14dB gain, 19dBm P-1 output power at 65mA operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O265SM84

The O265SM84 is a low noise amplifier operating at 0.7-4.0 GHz. Built-in bias circuit provides 14.5dB gain, 19dBm P1dB output power, and 2.5dB in-band noise figure at 65mA. The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs large area grounding. It is suitable for the reflow soldering installation process, and the lead wire needs manual welding.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O301SM5

The O301SM5 is a GaAs integrated low noise amplifier operating from 2 to 20 GHz. At +5V operating voltage, 16dB small signal gain, 2.5dB noise figure, and output third-order intercept point above +19dBm are available. The amplifier uses a 5x5mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O303SM5

The O303SM5 is a GaAs integrated low noise amplifier that operates from DC to 20GHz. At +5V operating voltage, 16dB small signal gain, 2.5dB noise figure, and output third-order intercept point above +24dBm are available. The amplifier uses a 5x5mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.