Integrated Low Noise Amplifier O265SM84
The O265SM84 is a low noise amplifier operating at 0.7-4.0 GHz. Built-in bias circuit provides 14.5dB gain, 19dBm P1dB output power, and 2.5dB in-band noise figure at 65mA.
The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs large area grounding. It is suitable for the reflow soldering installation process, and the lead wire needs manual welding.
Related products
GaAs Monolithic Integrated Power Amplifier O222G
The O222G is a GaAs monolithic integrated power amplifier chip operating at 8.0-12.0GHz delivering 21dB of power gain and 29dBm of saturated output power at + 8V operating power with an additional power efficiency of 30%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Power Amplifier O1193
The O1193 is a 2.7-3.5GHz GaN monolithic integrated power amplifier chip. It provides 24dB power gain and 40dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 40%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaN Monolithic Integrated Driver Amplifier O571
The O571 is a GaN monolithic integrated driver amplifier operating at 8.0-12.0GHz delivering 16dB of power gain and 26dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O210
The O210 is a GaAs monolithic integrated power amplifier chip operating at 6.8-9.0 GHz delivering 23dB of power gain and 33dBm of saturated output power with 100us pulse width, 10% duty cycle and + 6V operation. The power added efficiency 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O241
The O241 is a 1.2-1.4GHz GaAs monolithic integrated power amplifier chip, which provides 21dB power gain and 26dBm saturated output power at + 5V operating voltage with power added efficiency of 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip is metallized for eutectic sintering.
GaN Monolithic Integrated Driver Amplifier O568
The O568 is a GaN monolithically integrated driver amplifier chip operating at 2.0-6.0GHz delivering 25dB of power gain and 30dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O239
The O239 is a gallium arsenide PHEMT power amplifier chip operating at 1.0 ~ 1.4GHz, providing 25dB power gain and 28dBm saturated output power at + 5V working voltage
48% power added efficiency.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O243
The O243 is a 1.2 ~ 1.4GHz GaAs monolithic integrated power amplifier chip that provides 22dB power gain and 26dBm saturated output power at +5 V operating voltage with 36% power added efficiency.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.