喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Monolithic Integrated (Dual) Bidirectional Amplifier O559
The O559 is a GaAs monolithic integrated bi-directional amplifier chip operating from 8.0-12.0GHz. It operates from a single +5V supply and provides 26dB of gain and 16dBm of P1dB of output power at 110mA.
The bi-directional amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.
Monolithic Integrated (Dual) Bidirectional Amplifier O589
The O589 is a GaAs monolithic integrated bi-directional amplifier chip operating from 1.0 to 4.5 GHz. It provides 13dB of gain and 17dBm of P1dB output power at +5V and 70mA operating current.
The bi-directional amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.
Monolithic Integrated (Dual) Bidirectional Amplifier O592
The O592 is a GaAs monolithic integrated low bi-directional amplifier chip that operates from 2 to 20 GHz and provides 14dB gain and 13dBm P1dB output power at a +5V, 65mA operating current.
The amplifier chip uses on-chip via metallization process to ensure good grounding, the back of the chip is metallized, suitable for eutectic sintering or conductive adhesive bonding process.
Monolithic Integrated (Dual) Bidirectional Amplifier O596
The O596 is a GaAs monolithic integrated bi-directional amplifier chip operating from 0.7-3.0GHz. It operates from a single +5V supply and provides 12dB gain and 17dBm P1dB output power at 55mA operating current.
The bi-directional amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and suitable for eutectic sintering or conductive adhesive bonding processes.