Showing all 9 results

Show sidebar
Integrated Driver Amplifier O575QF4
Close

Integrated Driver Amplifier O228GFN5

The O228GFN5 is a driver amplifier that operates from 6 to 18 GHz. It provides 15dB small signal gain, 18dBm P-1 output power, and 20% power added efficiency at +5V operating voltage. The amplifier uses a 5x5mm surface-mount non-leaded ceramic package, hermetically sealed, and is suitable for reflow soldering installations.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O265FN5

The O265FN5 is a low noise amplifier operating from 0.8 to 5 GHz. At a +5V operating voltage, it provides 14dB of small signal gain, 19dBm of P-1 output power, and a typical noise figure of 2.5dB. The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O265SM4

The O265SM4 is a low noise amplifier operating from 0.8 to 5 GHz. 14dB gain, 19dBm P-1 output power at 65mA operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O281FN5

The O281FN5 is a low noise amplifier operating from 5 to 14 GHz. Under the +5V operating voltage, it can provide small signal gain of 20dB, P-1 output power of 19dBm, and the noise figure is typically 2.7dB. The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O281SM4

The O281SM4 is a low noise amplifier operating at 5-14GHz. It provides 19dB gain and 19dBm P1dB output power at 150mA operating current. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O283SM5

The O282SM5H is a low noise amplifier operating from 5 to 6 GHz. At a +5V operating voltage, it provides 24dB of small signal gain, 11dBm of P-1 output power, and a typical noise figure of 1.0dB. The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O290SM4

The O290SM4 is a low noise amplifier operating from 6 to 13 GHz. 42dB operating current, 21dB gain, 9dBm P1 output power. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O290SM5H

The O290SM5H is a low noise amplifier operating from 6 to 13 GHz. At a +5V operating voltage, it provides 21dB of small signal gain, 10dBm of P-1 output power, and a typical noise figure of 1.5dB. The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Integrated Low Noise Amplifier O303SM5
Close

Integrated Low Noise Amplifier O291SM5

The O291SM5 is a GaAs integrated low noise amplifier operating from 8 to 12 GHz. At +5V operating voltage, it provides 19dB small signal gain, 1.7dB noise figure, and output third-order intercept point above +20dBm. The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.