喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O265SM84
The O265SM84 is a low noise amplifier operating at 0.7-4.0 GHz. Built-in bias circuit provides 14.5dB gain, 19dBm P1dB output power, and 2.5dB in-band noise figure at 65mA.
The amplifier adopts 5x7mm surface-mounting cermet shell, fully sealed, and the bottom surface needs large area grounding. It is suitable for the reflow soldering installation process, and the lead wire needs manual welding.
Integrated Low Noise Amplifier O279SM4
The O279SM4 is a low noise amplifier operating at 2-6GHz. Built-in bias circuit provides 24dB gain, 12dBm P1dB output power, and 1.5dB in-band noise figure at 45mA.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O281SM4
The O281SM4 is a low noise amplifier operating at 5-14GHz. It provides 19dB gain and 19dBm P1dB output power at 150mA operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O286SM4
The O286SM4 is a low noise monolithic amplifier operating at 6-13 GHz. The built-in bias circuit can provide 20dB gain, 10dBm P1dB output power and an in-band noise figure of 1.5dB at room temperature under 42mA operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O287SM4
The O287SM4 is a low noise amplifier operating at 8-12 GHz. It provides 22dB gain and 13dBm P1dB output power at 55mA operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.
Integrated Low Noise Amplifier O288SM4
The O288SM4 is a low noise amplifier operating at 8-12 GHz. It provides 30dB gain and 12dBm P1dB output power at 65mA operating current.
The amplifier uses a 4x4mm surface-mount non-leaded ceramic package for hermetic encapsulation. The pin pad surface is gold-plated and suitable for reflow soldering.