喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O279SM5H
The O279SM5H is a low noise amplifier operating from 2 to 6 GHz. With a +5V operating voltage, it provides 25dB of small signal gain, 12dBm of P-1 output power, and a typical noise figure of 1.2dB.
The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Related products
GaAs Monolithic Integrated Power Amplifier O242
The O242 is a GaAs monolithic integrated power amplifier chip operating at 2.2 ~ 3.5GHz, which provides 22dB power gain and 29dBm saturated output power at + 9V operating voltage with power added efficiency of 35%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Driver Amplifier O568
The O568 is a GaN monolithically integrated driver amplifier chip operating at 2.0-6.0GHz delivering 25dB of power gain and 30dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O579
The O579 is a GaN monolithically integrated driver amplifier chip operating at 1.2 to 1.6 GHz delivering 23dB of power gain and 26.5dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O224
The O224 is a GaAs monolithic integrated power amplifier operating at 12.8 to 14.6GHz and delivers 23dB of power gain and 32dBm of saturated output power at a + 5V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O575
The O575 is a GaN monolithic integrated driver amplifier chip, dual power supply +28 V work, operating frequency coverage 2 ~ 6GHz. At 130mA operating current, can provide 18dB power gain, 26dBm of saturated output power.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Power Amplifier O252
The O252 is a GaN monolithic integrated power amplifier chip working on 4.4-6.0GHz. It provides 22dB power gain and 43dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 48%.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O243
The O243 is a 1.2 ~ 1.4GHz GaAs monolithic integrated power amplifier chip that provides 22dB power gain and 26dBm saturated output power at +5 V operating voltage with 36% power added efficiency.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O241
The O241 is a 1.2-1.4GHz GaAs monolithic integrated power amplifier chip, which provides 21dB power gain and 26dBm saturated output power at + 5V operating voltage with power added efficiency of 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip is metallized for eutectic sintering.