喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O265FN5
The O265FN5 is a low noise amplifier operating from 0.8 to 5 GHz. At a +5V operating voltage, it provides 14dB of small signal gain, 19dBm of P-1 output power, and a typical noise figure of 2.5dB.
The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Related products
GaN Monolithic Integrated Power Amplifier O252
The O252 is a GaN monolithic integrated power amplifier chip working on 4.4-6.0GHz. It provides 22dB power gain and 43dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 48%.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O242
The O242 is a GaAs monolithic integrated power amplifier chip operating at 2.2 ~ 3.5GHz, which provides 22dB power gain and 29dBm saturated output power at + 9V operating voltage with power added efficiency of 35%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Driver Amplifier O579
The O579 is a GaN monolithically integrated driver amplifier chip operating at 1.2 to 1.6 GHz delivering 23dB of power gain and 26.5dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Driver Amplifier O562
The O562 is a GaN monolithic integrated driver amplifier operating at 5.0-6.0 GHz delivering 21dB of power gain and 29dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O1195
The O1195 is a GaN monolithic integrated power amplifier chip operating at
4.4-5.1GHz. With a pulse width of 100us, a duty cycle of 10%, and a +28V operating voltage, it provides 19dB of power gain and 40dBm of saturated output power.
Power-added efficiency 48%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaN Monolithic Integrated Driver Amplifier O575
The O575 is a GaN monolithic integrated driver amplifier chip, dual power supply +28 V work, operating frequency coverage 2 ~ 6GHz. At 130mA operating current, can provide 18dB power gain, 26dBm of saturated output power.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O243
The O243 is a 1.2 ~ 1.4GHz GaAs monolithic integrated power amplifier chip that provides 22dB power gain and 26dBm saturated output power at +5 V operating voltage with 36% power added efficiency.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O212
The O212 is a GaAs monolithic integrated power amplifier chip operating at 12.7-15.4 GHz delivering 20dB of power gain and 32dBm of saturated output power with 100us pulse width, 10% duty cycle, and + 6V operation. The power added efficiency 28%. Integrated power detector, simplifying the application circuit.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.