喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O283SM5
The O282SM5H is a low noise amplifier operating from 5 to 6 GHz. At a +5V operating voltage, it provides 24dB of small signal gain, 11dBm of P-1 output power, and a typical noise figure of 1.0dB.
The amplifier uses 5x5mm surface-mount non-leaded ceramic package, hermetically sealed package, suitable for reflow soldering installation process.
Related products
GaN Monolithic Integrated Driver Amplifier O575
The O575 is a GaN monolithic integrated driver amplifier chip, dual power supply +28 V work, operating frequency coverage 2 ~ 6GHz. At 130mA operating current, can provide 18dB power gain, 26dBm of saturated output power.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O238
The O238 is a GaAs monolithic integrated power amplifier chip operating at 24.2-27.0GHz delivering 16dB of power gain and 33dBm of saturated output power at 6V with 27% additional power efficiency.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O579
The O579 is a GaN monolithically integrated driver amplifier chip operating at 1.2 to 1.6 GHz delivering 23dB of power gain and 26.5dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O1193
The O1193 is a 2.7-3.5GHz GaN monolithic integrated power amplifier chip. It provides 24dB power gain and 40dBm saturated output power with pulse width of 100us, duty cycle of 10%, and +28V operating voltage. Power-added efficiency 40%.
The power amplifier chip adopts an on-chip via hole metallization process to ensure good grounding, no additional grounding measures are needed, and the use is simple and convenient. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O214
The O214 is a GaAs monolithic integrated power amplifier IC operating from 11 to 17 GHz delivering 19dB of power gain and 28dBm of saturated output power at + 8V operating voltage.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O227
The O227 is a GaAs monolithic integrated power amplifier chip operating at 16.2-17.6 Ghz and delivering 19dB of power gain and 34.0dBm of saturated output power at a pulse width of 100us, duty cycle of 10%, and operating voltage of + 8V. The power added Efficiency of 29%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O242
The O242 is a GaAs monolithic integrated power amplifier chip operating at 2.2 ~ 3.5GHz, which provides 22dB power gain and 29dBm saturated output power at + 9V operating voltage with power added efficiency of 35%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Driver Amplifier O562
The O562 is a GaN monolithic integrated driver amplifier operating at 5.0-6.0 GHz delivering 21dB of power gain and 29dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.