喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O301SM7H
The O301SM7H is an integrated low noise amplifier that operates from 2 to 20 GHz. Provides 15dB of small signal gain, 2.0dB noise figure, and higher than +22V at +5V operating voltage
dBm output third-order intercept point.
The amplifier adopts 7x7mm surface-mount non-leaded ceramic package, which can realize gas-tight encapsulation. The surface of the pin pad is processed by gold plating and is suitable for reflow soldering installation process.
Related products
GaAs Monolithic Integrated Power Amplifier O214
The O214 is a GaAs monolithic integrated power amplifier IC operating from 11 to 17 GHz delivering 19dB of power gain and 28dBm of saturated output power at + 8V operating voltage.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Driver Amplifier O571
The O571 is a GaN monolithic integrated driver amplifier operating at 8.0-12.0GHz delivering 16dB of power gain and 26dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O239
The O239 is a gallium arsenide PHEMT power amplifier chip operating at 1.0 ~ 1.4GHz, providing 25dB power gain and 28dBm saturated output power at + 5V working voltage
48% power added efficiency.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O251
The O251 is a GaN monolithic integrated power amplifier chip operating at 5.0-6.5GHz. It provides 22dB power gain and 36dBm saturated output power at a continuous wave, +28V operating voltage, and a power-added efficiency of 48%.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O222
The O222 is a GaAs monolithic integrated power amplifier chip operating at 8.0-12.0GHz delivering 21dB of power gain and 29dBm of saturated output power at + 8V operating power with an additional power efficiency of 30%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O575
The O575 is a GaN monolithic integrated driver amplifier chip, dual power supply +28 V work, operating frequency coverage 2 ~ 6GHz. At 130mA operating current, can provide 18dB power gain, 26dBm of saturated output power.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O570
The O570 is a GaN monolithic integrated driver amplifier chip operating at 8.0-12.0GHz delivering 16dB of power gain and 24dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O210
The O210 is a GaAs monolithic integrated power amplifier chip operating at 6.8-9.0 GHz delivering 23dB of power gain and 33dBm of saturated output power with 100us pulse width, 10% duty cycle and + 6V operation. The power added efficiency 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.