喇叭天线
平面螺旋天线
龙勃天线
电磁兼容测试天线
电缆
接头&转接头
校准件
腔体滤波器
无源产品
5G
Integrated Low Noise Amplifier O303SM5
The O303SM5 is a GaAs integrated low noise amplifier that operates from DC to 20GHz. At +5V operating voltage, 16dB small signal gain, 2.5dB noise figure, and output third-order intercept point above +24dBm are available.
The amplifier uses a 5x5mm surface mount leadless ceramic package for hermetic encapsulation. The pin pad surface is gold plated and suitable for reflow soldering processes.
Related products
GaAs Monolithic Integrated Power Amplifier O222G
The O222G is a GaAs monolithic integrated power amplifier chip operating at 8.0-12.0GHz delivering 21dB of power gain and 29dBm of saturated output power at + 8V operating power with an additional power efficiency of 30%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O222
The O222 is a GaAs monolithic integrated power amplifier chip operating at 8.0-12.0GHz delivering 21dB of power gain and 29dBm of saturated output power at + 8V operating power with an additional power efficiency of 30%.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O568
The O568 is a GaN monolithically integrated driver amplifier chip operating at 2.0-6.0GHz delivering 25dB of power gain and 30dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaAs Monolithic Integrated Power Amplifier O210
The O210 is a GaAs monolithic integrated power amplifier chip operating at 6.8-9.0 GHz delivering 23dB of power gain and 33dBm of saturated output power with 100us pulse width, 10% duty cycle and + 6V operation. The power added efficiency 33%.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering process.
GaN Monolithic Integrated Driver Amplifier O562
The O562 is a GaN monolithic integrated driver amplifier operating at 5.0-6.0 GHz delivering 21dB of power gain and 29dBm of saturated output power at + 28V operating voltage.
The chip uses on-chip through-hole metallization process to ensure a good grounding, do not need additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaAs Monolithic Integrated Power Amplifier O214
The O214 is a GaAs monolithic integrated power amplifier IC operating from 11 to 17 GHz delivering 19dB of power gain and 28dBm of saturated output power at + 8V operating voltage.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.
GaN Monolithic Integrated Power Amplifier O251
The O251 is a GaN monolithic integrated power amplifier chip operating at 5.0-6.5GHz. It provides 22dB power gain and 36dBm saturated output power at a continuous wave, +28V operating voltage, and a power-added efficiency of 48%.
The chip uses on-chip via metallization process to ensure a good grounding, no additional grounding measures, easy to use. The backside of the chip is metallized and is suitable for eutectic sintering processes.
GaAs Monolithic Integrated Power Amplifier O243
The O243 is a 1.2 ~ 1.4GHz GaAs monolithic integrated power amplifier chip that provides 22dB power gain and 26dBm saturated output power at +5 V operating voltage with 36% power added efficiency.
The power amplifier chip using on-chip through-hole metallization process to ensure a good grounding, no additional grounding measures, easy to use. The back of the chip was metallized, suitable for eutectic sintering or conductive adhesive bonding process.